Repair of interior elements of cabin VAZ-2101 Zhiguli

Interior trim
The colors of interior trim materials are selected in accordance with modern requirements for interior decoration. The outer surface of the finishing materials has a matte surface...

Removing the roof lining
Unscrew the fastening screws and remove the lining of the pillars of the wind window and the central pillars. Take out the windshield and rear window with glass seals (see " Glass...

Roof lining installation
Arcs are introduced into the new roof upholstery (the first and second arcs are the same). Putting on anti-creak bushings, install the sixth arc in place and then the fifth,...

Removal and installation of rear upholstery of the sidewalls of VAZ-2102 and VAZ-21021 cars
The upholstery is attached, like the door upholstery, using a stainless steel upper holder into which the upper edge of the upholstery is inserted. The upper holder is riveted to...

Dashboard — device and removal
Device The design of the instrument panel meets safety requirements. The metal frame of the panel is covered with a layer of foamed energy-absorbing polyurethane foam and trimmed...

Front seat arrangement
Each seat is mounted on two skids that are screwed to the body brackets. Seat adjustment forward and backward - within 175.5 mm. When laying out the backrests in the sleeping...

Rear seat arrangement
Cushion and backrest frames consist of thin stamped and wire frames, to which springs are attached using metal brackets. To prevent creaking, the brackets are covered with a PVC...

Seat repair and replacement
Removal and installation of seats To remove the front seat, move it all the way back, unscrew the screw and unscrew the nut securing the guides to the floor. Then the seat is...

Design and operation of the heater and exhaust ventilation
Heating of the passenger compartment is provided by air heated in the radiator 9 (pic. 200) heater, which is included in the cooling system parallel to the main radiator. Air...

Checking and repairing the heating and ventilation system
Removal and installation of a heater To remove, move the valve control handle to the right to failure and drain the liquid from the cooling system. Disconnect the wire "weight"...