Device and repair of clutch units VAZ-2101 Zhiguli

General description of the transmission
Cars VAZ-2101, VAZ-2102 and their modifications have a classic layout, i.e. front engine and rear drive wheels. With this arrangement, the transmission includes a clutch, a...

The device and operation of the clutch
The clutch is one disk, dry, permanently closed type, with a central pressure diaphragm spring and a torsional vibration damper on the driven disk. The leading part of the clutch...

Removal and installation of clutch
Remove gearbox first ( see sect. 2.2 ), after which, unscrewing the bolts, remove the clutch assembly. In this case, it must not be lifted by the thrust flange of the pressure...

Clutch control
Clutch control is carried out on a base imitating the engine flywheel, with a metal intermediate ring 8.2 mm thick replacing the driven disk (pic. 64). Having fixed the clutch...

Removal and installation of the main and working cylinders of the clutch release drive
Before removing the cylinders, the working fluid is completely drained. To do this, one end of the hose is put on fitting 9 ( see fig. 62 ) the working cylinder, and the other is...

Dismantling, repair, control and assembly of the main and working cylinders
Master cylinder When disassembling the master cylinder, remove the protective rubber cap 17 ( see fig. 61 ) from the end of the cylinder body and the retaining ring 18, then the...

Clutch Release Adjustment
In the clutch release drive, the following adjustments are made: set a gap of 0.1-0.5 mm between the pusher and the master cylinder piston ( see fig. 61 ). This gap, necessary for...

Bleeding the hydraulic clutch release
Before pumping, check the fluid level in the tank and add fluid if necessary. Put on the head of the fitting 9 ( see fig. 62 ) the working cylinder is a hose, the lower end of...

Possible malfunctions of the clutch and its drive
Possible malfunctions of the clutch and its drive, their causes and remedies are given in Table. 7.