Door lock adjustment

Before adjusting the lock, it is recommended to outline the contour of the latch on the body pillar.

1. If the door closes too tightly, loosen the bolts securing the latch, move it outward and tighten the bolts. If the door closes weakly, move the latch inward. In this case, there should not be a protrusion or recession of the door relative to the body.

2. If the door drops when closing, raise the latch. If the door rises when closed (sag in open position) - Lower the latch.

3. If the door is poorly unlocked by the inner handle, then the position of the inner handle of the lock drive is adjusted. To do this, loosen the screws that secure the handle bracket, and move the handle together with the bracket to the desired position. Then tighten the screws.