Windshield washer pressure pump
![](https://www.vazbook.ru/img/vaz_2101/0768.jpg)
1 - cover; 2 - clip of the switch; 3 - lower contact of the switch; 4 - block with contacts; 5 – the top contact of the switch; 6 - exhaust valve; 7 - inlet valve; 8 - pump casing; 9 - button; 10 - return spring; 11 - stock; 12 - case; 13 - rod guide; 14 - top contact of the switch; 15 - holder of moving contacts; 16 - lower contact of the switch; 17 - holder guide; 18 - diaphragm; 19 - casing
Windshield washer diagram
![](https://www.vazbook.ru/img/vaz_2101/0769.jpg)
1 - jets; 2 - tee; 3 - pump; 4 - tank
Diaphragm type pump, non-separable, with foot drive. In case of malfunction, replace it with a new one.
1. To remove the pump, unscrew the fastening nuts and remove it as an assembly.
2. Disconnect the electrical wires from the pump and remove the tubes from the fittings.
3. Install the pump in reverse order.