Power supply and exhaust system for engines VAZ-21011

Features of the fuel system device
The power supply system includes fuel, air and exhaust gas supply devices. Fuel tank 8 (see fig. Fuel tank and fuel lines ) welded, stamped from leaded steel sheet, painted with...

Air filter — removal and installation
Air filter 1 - nut; 2 – filter cover; 3 - adjusting arrow; 4 - air intake pipe for the summer period; 5 - filter housing; 6 - warm air supply hose for the winter period; A - blue...

Fuel pump — removal and installation
Fuel pump 1 - discharge pipe; 2 - filter; 3 - body; 4 - suction pipe; 5 - cover; 6 - suction valve; 7 - pusher; 8 – manual fuel pumping lever; 9 - spring; 10 - cam; 11 - balancer;...

Fuel tank — removal and installation
Fuel tank and fuel lines 1 - fuel pump; 2 - a hose from the fuel pump to the carburetor; 3 - carburetor; 4 - back tube; 5 – sensor of level indicator and fuel reserve; 6 – a...

Features of the carburetor device
Scheme of the main dosing system of the carburetor and econostat The econostat is located in the secondary chamber of the carburetor. In the diagram, it is conditionally shown in...

Idle adjustment
Carburetor idle adjustment screws 1 – mixture quantity screw; 2 - composition screw (quality) mixtures Elements for adjusting the idle speed of the engine include screw 2, which...

Setting the fuel level in the float chamber
Setting the fuel level in the float chamber 1 - carburetor cover; 2 - needle valve seat; 3 - emphasis; 4 - needle valve; 5 – a ball of a locking needle; 6 - draw fork of the valve...

Carburetor Drive Adjustment
Carburetor cover details 1 - adjusting screw; 2 - starter cover; 3 - spring; 4 - diaphragm; 5 - diaphragm rod; 6 - body of the starting device; 7 - telescopic rod; 8 - axis of the...

Removal and installation of the carburetor on the car
Carburetor control drive 1 - transverse thrust; 2 - longitudinal thrust; 3 - bracket for fastening the thrust; 4 - air damper control cable; 5 and 7 - seals; 6 - cable handle; 8 -...

Dismantling the carburetor
View of the carburetor from the throttle actuator side 1 - air damper; 2 - starting device; 3 – air damper drive lever; 4 - telescopic rod; 5 – damper control lever; 6 - a lever...

Cleaning and checking the technical condition of the carburetor
Fuel filter Wash the filter in gasoline and blow it with compressed air. Check the condition of the filter and the sealing tapered belt of the filter plug. If the filter or plug...

Carburetor assembly
The carburetor is assembled in the reverse order of disassembly. In doing so, pay attention to the following: the float must rotate freely on its axis, without touching the walls...

Adjusting and checking the carburetor after assembly
Carburetor Throttle Adjustment a - partial opening of the throttle valve of the primary chamber; b - full opening of the throttle valves; 1 - lever on the axis of the throttle...

Exhaust gas outlet
Exhaust system 1 - gasket; 2 – a reception pipe of mufflers; 3 – an arm of fastening of a reception pipe to a transmission; 4 - clamps for connecting muffler pipes; 5 – additional...