Features of the fuel system device

The power supply system includes fuel, air and exhaust gas supply devices.

Fuel tank 8 (see fig. Fuel tank and fuel lines) welded, stamped from leaded steel sheet, painted with black enamel. The tank is installed in the trunk on the right side on a rubber gasket and is attached to the body with two clamps 10, tightened with a bolt.

Fuel pump 1 is a diaphragm type, mounted on the left side of the cylinder block and driven by a pusher from the eccentric of the oil pump drive shaft and the ignition distributor. To fill the system with fuel, there is a manual fuel pumping lever.

Dry type air filter consists of 5 housing (see fig. Air filter), cover 2 and filter element. The air filter has two inlet pipes: an air intake pipe 4 for the summer period of operation and a pipe for air intake heated from the exhaust manifold in the winter. To switch the air intake, filter cover 2 is placed with the corresponding mark on the cover against arrow 3.