Carburetor control drive
1 - transverse thrust; 2 - longitudinal thrust; 3 - bracket for fastening the thrust; 4 - air damper control cable; 5 and 7 - seals; 6 - cable handle; 8 - lock washer; 9 - throttle control pedal; 10 and 17 - return springs; 11 - lever; 12 - roller; 13 - bracket for mounting the roller; 14 - lever; 15 - intermediate lever; 16 - return spring screw
1. Remove the air filter.
2. Disconnect the thrust 1 and the return spring 17 from the throttle actuator lever. Disconnect the air damper cable 4 from the carburetor.
3. Disconnect the hoses from the carburetor. Close the ends of the fuel and coolant supply hoses with plugs to prevent leakage of fuel and liquid.
4. Remove the carburetor. Close the inlet of the inlet pipeline with a plug.
5. Install the carburetor in the reverse order of removal. After installation, adjust the carburetor throttle actuator, as well as engine idling.