Steering of cars VAZ-2104

Description of the steering structure
Steering Details: 1 - outer lateral thrust tip (2101-3003057); 2 - adjusting clutch (2101-3003054); 3 - tip of the left lateral thrust inner (2101-3003064); 4 - filler plug 22x1.5...

Steering — checking the technical condition and adjusting the steering mechanism
Checking the condition of the steering in case of signs of malfunction (knocking, increased play or tight steering wheel rotation) or during periodic inspections of the car (see "...

Steering Gearbox — Checking the Oil Level
1. Before checking the oil level, wipe the plug and the steering gear housing cover with a rag. 2. Open end wrench by 8 mm unscrew the filler plug. 3. Using a screwdriver or other...

Gearing in the steering gear — adjustment
An assistant is required to complete the work. 1. We install the car on a horizontal, flat area. Wheels must be aligned in the straight ahead direction (see " Vehicle preparation...

Steering wheel — removal and installation
Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. We install the steering wheel in the direction of the rectilinear...

Steering shaft covers — removal and installation
To perform the work, you will need a tape clamp with a length of 100 to 130 mm. Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair...

Steering shaft — removal and installation
Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Remove the steering column switch (see " Paddle switches - removal and...

Tie rods — replacement
Removing 1. We install the car on a viewing hole or overpass (see " Vehicle preparation for maintenance and repair "). 2. We clean the nuts and tie rod covers from dirt. 3. Apply...

Steering gearbox — removal and installation
An assistant is required to complete the work. Removing 1. We install the car on a viewing hole or overpass (see " Vehicle preparation for maintenance and repair "). 2. On a car...

Pendulum lever — replacement
Removing 1. We install the car on a viewing hole or overpass (see " Vehicle preparation for maintenance and repair "). 2. Disconnect the tie rods from the pendulum arm (see " Tie...