Removing
1. We install the car on a viewing hole or overpass (see "Vehicle preparation for maintenance and repair").
2. Disconnect the additional muffler from the main muffler (see "Additional muffler - removal and installation").
3. With a slotted screwdriver, we unbend the hooks of the suspension belts of the main muffler and disconnect them from the body brackets.
On a car with an injection system, disconnect the hooks of the belts A of the suspension of the main muffler and remove the cotter pin B from the bracket.
4. Key by 7 mm unscrew the bolt securing the main muffler to the pillow and remove the bolt. If necessary, treat the thread with a penetrating lubricant.
5. Remove the main muffler.
6. To replace the pillow, we clean the joint and treat it with a penetrating lubricant.
7. Key by 7 mm unscrew the nut securing the pillow to the body bracket, holding the bolt from turning with a wrench of the same size.
8. Remove the pillow.
Installation
1. We apply graphite grease to the junction of the main and additional silencers, as well as to the threads of the bolts.
2. If necessary, replace the belts and pillow with new ones.
3. Installation of the main muffler is carried out in reverse order.