Removal and installation of a radiator
To remove, unscrew the drain plugs of the radiator, cylinder block and drain the coolant from the system. In this case, the heater valve must be open, the upper control handle for the valve in the passenger compartment must be moved to the right. When unscrewing the drain plug, in order not to damage the radiator, hold the plug fitting with a second key. Loosen the clamps and disconnect the hoses from the radiator. Turn out bolts of fastening of a casing of a radiator and a radiator to a front end of a body. Carefully remove the radiator and radiator shroud from the engine compartment.
Removal and installation of the pump of a cooling liquid
Drain the coolant from the system (see section «Removal and installation of a radiator»).
- loosen the nuts securing the generator and move the generator to the engine;
- remove the pump and alternator drive belt;
- unscrew the nuts of fastening to the pump of the liquid outlet pipe from the heater radiator and disconnect the tube;
- Turn out bolts of fastening of the case of the pump to the block of cylinders and remove the pump in gathering.
Install the pump on the engine in reverse order.