Windshield with seal, assy
1 - stamping for water flow; 2 - lining of the edging of the seal; 3 - edging of the seal; 4 - glass; 5 - sealant; 6 – wind window opening flange
1. To take out the damaged glass, remove the wiper arms, the seal bezel and, by pressing on the upper corners of the glass, squeeze it out. In this case, the assistant must hold the glass from the outside.
2. Wash the grooves of the seal 5 with gasoline (see fig. Windshield with seal, assy).
3. Put the seal 5 with edging 3 on the glass.
4. Insert the cord 1 with a screwdriver into the groove with which the seal 2 is put on the flange of the body opening.
5. Install the glass in the opening of the body and pull the ends of the cord from the inside of the body so that the seal sits in its place.
6. The assistant should lightly press on the glass from the outside.