Execution sequence
1. We prepare the car for work (see "Vehicle preparation for maintenance and repair").
Attention! When performing the following operation, a small amount of fuel will flow out of the hoses, which we drain into a previously prepared container or plug the hoses with two M8 bolts.
2. Loosen the hose clamps to the filter fittings and remove the filter.
3. Install a new filter. At the same time, we orient the filter according to the arrow pointer on its body towards the fuel pump.
4. Tighten the clamps.
5. We start the engine and check for fuel leaks at the junctions of the filter with hoses.