Prying with a screwdriver, disconnect the drive rod from the lock (see Rear door lock actuator replacement).
Using a Phillips screwdriver, unscrew the two screws and push the inside handle of the lock inside the door (see Replacing the front door lock).
Using a Phillips screwdriver, unscrew the three screws securing the lock...
... and remove the lock from the door along with the rod and the inner handle.
key «for 8» unscrew the two nuts securing the handle...
...and remove the outer handle from the door.
Install the handle in reverse order.
Before installing the door upholstery, we check the operation of the lock.