Using a screwdriver, remove the armrest cover.
Using a Phillips screwdriver, unscrew the three screws securing it through the holes in the armrest and remove the armrest.
We introduce the blade of a slotted screwdriver between the socket and the lining of the window handle. Squeezing the lining from the socket, unhook them and remove the handle lining.
Remove the handle and handle socket.
Prying off with a slotted screwdriver, remove the lining of the inner handle of the door lock.
Prying with a slotted screwdriver, «snap off» 7 plastic upholstery fasteners located on the bottom and sides of the door.
Slightly lower the upholstery and remove it from the inside door handle.
If necessary, for example, to replace the glass, remove the upholstery trim.
We unscrew the lock button with a hand or a Phillips screwdriver.
Using a Phillips screwdriver, unscrew the self-tapping screw of its side fastening.
Pry off with a slotted screwdriver and «snap off» three plastic clips.
Raising, remove the lining from the door.
Install the door trim in reverse order.