Loosen the clamps with a screwdriver and remove the hoses from the heater radiator pipes.
key «for 8» remove two screws...
... and remove the seal from the radiator pipes.
In the car, remove the dashboard shelf (see Replacing the dashboard shelf). For convenience, remove the glove box housing (see Glove box body replacement).
key «on 7» loosen the screw and disconnect the heater tap drive rod.
key «on 10» unscrew the two screws securing the valve to the heater radiator...
... and remove the heater valve together with the inlet pipe and rubber gasket.
key «on 10» unscrew the two screws and disconnect the inlet pipe with the gasket from the tap.
Pay attention to the gasket profile.
We remove and rearrange the bracket for fastening the drive rod to the new crane.
Install a new faucet with new gaskets in the reverse order of removal. We fill the engine cooling system with liquid and make sure that the connections of the valve with the heater radiator and the inlet pipe are tight.