Remove the oil filler cap.
hex key «at 12» unscrew the drain plug of the oil pan and drain the oil into a previously prepared container with a volume of at least 4 liters.
We turn off with a special key or hands...
...and remove the oil filter.
We wrap the cork of the oil pan.
Pour fresh oil into the new oil filter and apply it to the rubber o-ring of the filter. Wipe the mating ring of the block with a rag.
We wrap the oil filter by hand and wipe the oil drips.
Pour fresh engine oil through the filler neck, monitoring its level on the dipstick.
It must be between the marks «MIN» and «MAX» on the probe.
We start the engine for a few minutes, after which we stop it and after 10 minutes we check for leaks from under the oil filter and the oil level in the engine. If necessary, tighten the filter, add oil.