Car clutch repair VAZ-21061 «Zhiguli»

Description of the clutch design
Clutch with hydraulic release 1 - adjusting nut; 2 - locknut; 3 – withdrawal spring; 4 – the piston of the working cylinder of coupling; 5 - working cylinder; 6 – bleed fitting; 7...

Replacing the fluid and pumping the hydraulic clutch
It is recommended to replace the clutch fluid every five years of vehicle operation. We pump the hydraulic drive in the case when air got into the system for one reason or...

Clutch drive adjustment
Adjustment of the clutch drive consists in providing clearances between the pusher and the piston of the master cylinder and between the clutch release bearing and the friction...

Clutch Master Cylinder Replacement
With a rubber bulb, we select fluid from the clutch hydraulic reservoir. After loosening the band clamp, remove the hose from the cylinder fitting. key «at 13» unscrew the pipe...

Clutch Master Cylinder Repair
Remove the clutch master cylinder from the car (see Clutch Master Cylinder Replacement ). Using a screwdriver, remove the protective cap from the end of the cylinder. Prying with...

Clutch Slave Cylinder Replacement
We carry out work on a viewing ditch or a lift. Disconnect the release spring. Use pliers to remove the cotter pin from the end of the pusher. key «at 17» loosen the hose end in...

Replacing the pressure plate assembly and clutch release bearing
To access the clutch discs, you need to remove the gearbox (see Gearbox replacement ), but there is a less time-consuming way. We carry out work on a viewing ditch or a lift....