Car gearbox VAZ-21061 «Zhiguli»

Description of the design of the gearbox
Four speed gearbox (lengthwise cut) 1 - input shaft; 2 - bearing cover; 3 – a cuff of a primary shaft; 4 - input shaft bearing; 5 - breather; 6 - the drive gear of the...

Checking the level and changing the oil in the gearbox
We carry out work on a viewing ditch or a lift. key «at 17» unscrew the filler plug and check the oil level with a finger or a hook. The oil level in the gearbox must reach the...

Reversing light switch replacement
We carry out work on a viewing ditch or a lift. Disconnect the contacts from the switch. key «at 22» flip the switch... ...and take it off. Install the new switch in the reverse...

Replacement of a cuff of a secondary shaft
We carry out work on a viewing ditch or a lift. Disconnect the driveline from the gearbox (see Replacing the driveline ) and move it back. For ease of use... ... head «at 13»...

Gearbox replacement
We work on a viewing ditch or a lift. Disconnect «negative» battery wire. Disconnect the driveline from the gearbox (see Replacing the driveline ) and remove it from the car....

Gearbox repair
Attention! The gearbox consists of a large number of parts, many of them are similar, therefore, to facilitate assembly, the parts should be laid out on sheets of paper in order...

Replacing the speedometer drive
We carry out work on a viewing ditch or a lift. key «at 13» unscrew the clamp bolt securing the exhaust pipe of the muffler to the gearbox. We unscrew the nut securing the...

Features of the repair of a five-speed gearbox
To facilitate the removal and subsequent installation of the elastic coupling, tightly wrap it with tape. Opening with two keys «at 19» three nuts and removing three bolts, remove...