Removing
1. We install the car on a viewing hole or overpass (see "Vehicle preparation for maintenance and repair").
2. With an 8 mm socket wrench, unscrew four self-tapping screws A side mounting, four self-tapping screws B front mount and four bolts IN rear attachment of the mudguard.
6. Remove the additional mudguard.
3. Remove the mudguard.
4. On a car with an injection engine, an additional shield is also installed. It is fastened at the front with bolts for fastening the main shield, and at the back - with two self-tapping screws.
To remove it with an 8 mm socket wrench, unscrew the four bolts of the general fastening of the shields.
5. With the same tool, unscrew the two screws of the rear fastening of the shield.
6. Remove the additional mudguard.
Installation
Shields are installed in reverse order.