Disassembly
1. We prepare the car for operations (see "Vehicle preparation for maintenance and repair").
2. Remove the front seat (see above, "Front seat - removal and installation").
3. Move the guide along the outer slide to the front of the seat.
4. Using pliers, we remove from the hole in the rod the lock of the screw stroke that regulates the inclination of the seatback.
5. While holding the rod, we unscrew the screw from it.
6. With an 8 mm socket wrench, unscrew the bolt of the rear fastening of the outer slide.
7. Move the guide along the slide to the back of the seat.
8. Holding the rod and guide with your hand, use an 8 mm socket wrench to unscrew the bolt of the front fastening of the slide.
9. Remove the outer sled along with the guide, removing the spring hook from the hole in the sled.
10. Using an 8 mm socket wrench, unscrew the two bolts securing the inner slide and remove them together with the guide.
Installation
1. We clean from dirt and apply grease to the rubbing parts.
2. Installation of mechanisms of adjustment of a forward seat is carried out in return sequence.