Rear seat — removal and installation

The seat cushion is mounted on two latches welded to the body floor cross member. The upper part of the backrest is fixed with two metal plates in brackets on the body shelf, and the lower part is fixed with two wire loops fixed by folding plates on the wheel arches.

Removing

1. Grasping the lower part of the seat cushion frame near the latch, with a vigorous upward movement, raise the edge of the cushion. Similarly, we lift the edge of the pillow on the other side and remove the pillow from the passenger compartment.



2. With a screwdriver or other suitable tool, we bend the plates on both sides that fix the lower part of the back and remove it from the plates.



3. Raising the backrest, we remove the plates from the brackets that fix its upper part. We take out the back of the rear seat from the passenger compartment.

Installation

The rear seat is installed in the reverse order.