Through the mounting block, the wiring harnesses of the engine compartment are connected to the wiring harness of the instrument panel and the harness going to the rear of the car. The harness blocks are painted in different colors, and the block walls are marked with colored marks of the corresponding connector. Fuse numbers and relay designation pictograms are printed on the inner surface of the block cover. The car uses flag-type fuses, which, depending on the strength of the maximum current, have a different color:
- 7.5 A - brown;
- 10 A - red;
- 15 A - blue;
- 20 A - yellow.
Relay and fuse mounting block: R1 - relay for turning on the heating of the rear window; R2 - high beam headlight relay; R3 - relay for switching on the dipped headlights; F1-F17 - fuses; 1 - installation location of the relay for switching on cleaners and headlight washers; 2 - jumper (previously installed horn relay); 3 - jumper (a relay for turning on the electric motor of the cooling fan was previously installed); 4 - tweezers for replacing fuses; 5 - spare fuses; 6 - tweezers for replacing the relay
Table 13.1. Fuse-protected circuits
|
№ |
Current, (A) |
Protected circuits |
|
F1 |
10 |
Heater motor |
|
F2 |
10 |
Wiper Motor |
|
F3 |
10 |
Spare |
|
F4 |
10 |
Spare |
|
F5 |
20 |
Rear window heating element and relay for its inclusion (contacts) |
|
F6 |
10 |
Cigarette lighter |
|
F7 |
20 |
Sound signals |
|
F8 |
10 |
Hazard switch with indicator lamp |
|
F9 |
7,5 |
Rear fog lamps and their indicator |
|
F10 |
10 |
direction indicators (in turn guidance mode) |
|
F11 |
10 |
Interior light |
|
F12 |
7,5 |
high beam lamp (right headlight) |
|
F13 |
10 |
high beam lamp (left headlight) |
|
F14 |
10 |
side light lamp (left block headlight) |
|
F15 |
20 |
side light lamp (right block headlight) |
|
F16 |
10 |
dipped headlights (right block headlight) |
|
F17 |
7,5 |
dipped headlights (left block headlight) |