Front door — removal and installation Attention! If electrical equipment is installed in the door, disconnect the wires before removing. Notes: We recommend removing and installing the front door with two people. When...
Replacing the upholstery of the front door A lining is installed under the upper end of the handle. 1. Insert a thin screwdriver between the socket and the power window handle trim. After pressing the socket with a...
Replacing the glass and power window of the front door Before the beginning: lower the glass all the way down, remove the door upholstery and the outside rear-view mirror. Note. To remove the glass, you need to remove the window...
Front door lock Attention! The door lock is non-separable and cannot be repaired. If the lock is broken, replace it. 1 - lock switch lever 2 - external drive lever (pens) 3 - internal drive lever...
Rear door — removal and installation 1. Open the door and remove the two bolts securing the limiter bracket to the B-pillar. 2. Open the bolts securing the upper and lower door hinges to the middle pillar of the body...
Replacing the glass and power window of the rear door Rear protective film with mounting holders. 1 – nuts of fastening of directing window regulator 2 – nuts of fastening of the mechanism of a window regulator 1 – a place of marking...
Rear door lock 1 – draft of the external handle; 2 - outer handle; 3 - intermediate lever of the locking rod; 4 - blocking rod; 5 - internal lock; 6 – draft of the internal handle; 7 - inner...
Trunk lid — removal and installation It is recommended to remove the trunk lid with two people. Before unscrewing the cover fastening nuts, first mark the position of the hinges relative to the cover by tracing the...