A lining is installed under the upper end of the handle.
1. Insert a thin screwdriver between the socket and the power window handle trim. After pressing the socket with a screwdriver, slide the lining so that the protrusion on it (see note) disengaged from the socket.
Note. The protrusion on the facing of the window lifter handle.
2. Remove the power window handle trim.
3. Remove the power window handle.
4. Remove the power window handle socket.
5. Using a thin screwdriver, remove the two plugs from the armrest handle.
6. Loosen the two fixing screws and remove the armrest handle.
7. Loosen the two screws securing the door pocket.
8. Unscrew the door lock button.
9. Press out with a thin screwdriver and disengage the latch of the socket of the inner door lock handle.
10. Pull the handle towards you and remove the socket.
11. Use a screwdriver to pry upholstery so that the fastening clips come out of the holes in the door (see note).
Note. The location of the caps in the door upholstery.
12. To remove the upper clips of the upholstery from the holes, bend the edge of the seal.
13. Remove the door trim. Installation of an upholstery is made in an order, the return to removal.