Car doors and windows VAZ-2110

Replacing the outer part of the front door lock
To carry out repairs, you will need: stud with M8 thread, approximately 100 mm long; wrench from a set of socket wrenches with a large cross tip. Helpful advice. The key can be...

Removal and installation of a covering of a forward door
Note. Removal and installation of a covering is shown on the door equipped with a window lifter with the electric drive. The text indicates the features of removing the trim from...

Removal, installation, replacement of the front door lock cylinder
Removing 1. Remove the door trim. 2. Remove the plastic film from the front door. 3. Disconnect the rod end from the front door lock lever. 4. Use a slotted screwdriver to remove...

Removal and installation of the external handle of a forward door
Removing 1. Remove the door trim. 2. Remove the plastic film from the front door. 3. Disconnect the outer door handle rod end from the lock lever. 4. With a 10 mm spanner, unscrew...

Removal, installation and adjustment of the front door lock
Note. The door lock consists of an inner and outer part. In the event of a malfunction of the outer part, it can be replaced without removing the door trim. When replacing or...

Removal, installation, replacement of a window regulator of a forward door
Note. The operation is shown on the example of a power window lifter. Features of removal and installation of a window regulator with a mechanical drive are specified in the text....

Removal, installation, replacement of front door glass
Removing 1. Disconnect the door glass bracket from the power window. Raise the glass all the way up with your hand so that it locks into the upper seal. 2. Using an 8 mm socket...

Removal, installation, replacement of the front door opening limiter
Removing 1. Remove the door trim. 2. Remove the plastic film from the front door. 3. Through a steel drift, we knock out the axial pin of the door stop rod. 4. Using a 10 mm...

Removal, installation, replacement of the front door
Note. The work is shown with partial disassembly of the door. If necessary, the door can be removed after dismantling all its elements. Helpful advice. When replacing a door,...

Removal and installation of a covering of a back door
Note. Removal and installation of a covering are shown on an example of the right back door. All equipment of the left rear door can be removed and installed in the same sequence....

Removal, installation, replacement of the outer rear door handle
Removing 1. Remove the trim from the rear door. 2. Remove the plastic film from the rear door. 3. Disconnect the outer handle rod from the lock lever. 4. Using a 10 mm socket...

Removal, installation, replacement of the rear door lock
Note. The door lock consists of an inner and outer part. In the event of a malfunction of the outer part, it can be replaced without removing the door trim. When replacing or...

Removal, installation, replacement of a window lifter of a back door
Note. Power windows can be installed in the rear doors, similar to those installed in the front doors. Removing 1. Remove the rear door trim. 2. Remove the door lock. 3. Remove...

Removal, installation, replacement of rear door glass
Removing 1. Remove the rear door trim. 2. Remove the power window. Note. When carrying out the following work, do not use a screwdriver as a lever. 4. We slip a slotted...

Removal and installation of the limiter of opening of a back door
Removing 1. Remove the trim from the rear door. 2. Remove the plastic film from the rear door. 3. Through a steel drift, we knock out the axial pin of the limiter rod. 4. Using a...

Removal and installation of a back door
The description of the work is given with partial disassembly of the rear door. If necessary, the door can be removed after dismantling all its elements. An assistant is required...