Removing
1. Remove the front fender liner.
2. Remove the front bumper.
3. Remove the decorative door sill.
4. Turn off with an 8 mm socket wrench:
A) self-tapping screw of the lower wing mount;
b) two self-tapping screws of the rear wing mount;
V) self-tapping screw of the front wing mount;
G) four self-tapping screws of the upper wing mount.
5. Carefully, trying not to damage the headlight, remove the wing (first, we move the wing away from the body at the rear, remove the cartridge with the lamp from the side direction indicator, and then disengage it from the headlight diffuser).
Installation
We install the front fender and all removed parts on the car in reverse order.
Helpful advice. After installing the front fender (before fender installation) treat the wing, especially in the rear part, with an anti-corrosion coating.