Helpful advice. The bonnet gas struts should be replaced one by one. If the stops are so loose that they cannot hold the hood, place some kind of stop under the hood.
Removing
1. We prepare the car for repair work.
2. Having opened the hood, with a 13 mm open-end wrench, unscrew the ball pins of the lower and upper fastenings of the gas stop (do not lose the lock washers put on the fingers).
3. Remove the gas stop.
Installation
We install the gas stop on the car and all the removed parts in the reverse order.
Similarly, we replace the gas stop on the right side of the hood.