Car tailgate VAZ-2110

Removal, installation and adjustment of the trunk lock (VAZ-2110)
Removing 1. We prepare the car for repair work. 2. Using a slotted screwdriver, we pry and remove the four fasteners for fastening the lining of the trunk lid lock. 3. Remove the...

Removal and installation of a back spoiler of a luggage carrier (VAZ-2110)
Removing 1. We prepare the car for repair work. 2. Disconnect the additional brake light wire connector. 3. We mark the color of the wires on the connector. Using a thin-bladed...

Removal and installation of a decorative overlay of a luggage carrier (VAZ-2110)
Removing 1. We prepare the car for repair work. 2. Remove the lining of the trunk lid lock. 3. Using an 8 mm socket wrench, unscrew the four nuts securing the decorative lining of...

Removing, installing and adjusting the trunk lid (VAZ-2110)
To carry out repairs, you will need: assistant; aluminum or copper wire one meter long. Removing 1. We prepare the car for work. 2. Remove the internal rear lights mounted on the...

Adjustment of a tension of a spring of loops of a luggage carrier (VAZ-2110)
The trunk lid hinge springs must securely lock the lid in the up position. If the force developed by the springs is not enough to hold the lid in this position, adjust their...

Removal and installation of a back spoiler of a luggage carrier (VAZ-2111)
The rear window cleaner and washer nozzle are installed in the trunk lid. The washer reservoir is located in the engine compartment on the right. Two gas stops are installed on...

Removal and installation of a covering of a cover of a luggage carrier (VAZ-2111)
Helpful advice. The trunk lid trim fasteners can be removed with two slotted screwdrivers, but this job can be done much easier with a special tool. Removing 1. Using a Phillips...

Removal and installation of the electric drive of the lock of a luggage carrier (VAZ-2111)
Removing 1. Remove the inner door trim. 2. Using a slotted screwdriver, disconnect the rod end from the lock lever. 3. We take out the rod from the hole of the lock electric drive...

Removal and installation of a decorative overlay of a luggage carrier (VAZ-2111)
Removing 1. Remove the lining of the trunk lid. 2. Holding the decorative trim from the outside, use an 8 mm socket wrench with a deep head to unscrew the four nuts securing the...

Removal and installation of a larva of the lock of a cover of a luggage carrier (VAZ-2111)
Removing the lock cylinder 1. Remove the inner lining of the cover. 2. Remove the outer decorative lining of the trunk lid. 3. Using a slotted screwdriver, remove the spring clip...

Removal and installation of the trunk lid lock (VAZ-2111)
Removing 1. Remove the inner lining of the trunk lid. 2. Using a slotted screwdriver, unscrew the screw that fixes the lock drive rod. 3. Using a 10 mm socket wrench with a deep...

Removal and installation of a screen wiper of a luggage carrier (VAZ-2111)
Removing 1. Remove the inner lining of the trunk lid. 2. Raise the protective cover of the wiper arm mounting nut and use a 10 mm ring wrench to unscrew the nut a few turns. 3....

Removing and installing the trunk lid (VAZ-2111)
Note. Power to the electrical equipment of the trunk lid is supplied through two wiring harnesses laid along the rear pillars. To remove the trunk lid from the car, you must...

Removal and installation of gas emphasis of a cover of a luggage carrier (VAZ-2112)
The trunk lid is equipped with a rear window cleaner and a washer jet. There are two gas stops on the cover. They help open the lid and keep it open. If the lid closes under its...

Removal and installation of a back spoiler of a cover of a luggage carrier (VAZ-2112)
Removing 1. We prepare the car for repair work. 2. On the inside of the cover, use a Phillips screwdriver to unscrew the screw of the right spoiler mount. 3. Similarly, unscrew...

Removal and installation of a covering of a cover of a luggage carrier (VAZ-2112)
Removing 1. We prepare the car for repair work. 2. We turn off two self-tapping screws of fastening of the top covering of a cover. 3. Prying with a screwdriver, remove the four...

Removal and installation of a decorative overlay of a luggage carrier (VAZ-2112)
Removing 1. Remove the lining of the trunk lid. 2. Using an 8 mm socket wrench, unscrew the two nuts of the left fastening of the cover lining. 3. Similarly, unscrew the two nuts...

Removal, installation and adjustment of the trunk lock (VAZ-2112)
Removing the trunk lid trim 1. Using a Phillips screwdriver, unscrew the screws securing the skin to the cover (one self-tapping screw is located at the top of the skin on the...

Removal and installation of a back screen wiper (VAZ-2112)
Removing 1. We prepare the car for repair work. 2. Remove the wire terminal from the negative battery terminal. 3. Remove the lining of the trunk lid. 4. Squeezing the latches,...

Replacing the rear washer nozzle (VAZ-2112)
Removing 1. Remove the rear spoiler. 2. Squeezing the two latches, remove the nozzle from the spoiler base. Installation We install the nozzle and spoiler on the car in reverse...

Removing and installing the trunk lid (VAZ-2112)
Note. The work of removing the trunk lid is laborious - you first need to dismantle the wiring harness laid inside the lid. The job may require an assistant to remove and carry...