Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
3. With a slotted screwdriver, remove the three plugs inserted into the unused sockets for the switches.
4. Through the opened openings, we compress the spring clips located on the sides of the control unit, and remove the unit from the instrument panel.
5. Disconnect the two blocks of electrical connectors from the control unit.
Recommendation. If, after removing the control unit, other controls are also removed from the center console of the instrument panel, then the pads should be marked with a marker. This will make assembly easier
Installation
Install the block in reverse order.