Rear seat — removal and installation

The rear seat cushion and backrest are divided 1 to 2. Any part of the cushion or backrest can be folded independently of the second part. Both parts of the rear seat back are equipped with head restraints.

1. We prepare the car for work (see "Preparing the car for maintenance and repair").

2. Pulling the loop, fold the right side of the seat cushion forward.



3. Ring wrench by 10 mm unscrew the two nuts securing the hinges of the right side of the pillow to the floor and remove it.



4. Similarly, remove the left side of the pillow.

5. socket wrench by 13 mm unscrew the two lower nuts securing the hinges of the right side of the back.



6. Raise the lock lever of the right side of the backrest up.



7. Fold the seatback forward.

8. socket wrench by 13 mm unscrew the nut (1) and bolt (2) upper fastening of the hinges of the right side of the seatback.

9. Remove the right side of the rear seat back.



10. Remove the left side of the back in the same way.

Installation

Install the rear seat in reverse order.