Car tailgate VAZ-2112

Gas stops of the tailgate — removal and installation
Advice. It is more convenient to replace the stops one by one. If it is necessary to remove two stops at the same time, the door must be fixed in the open position by any...

Spoiler — removal and installation
An assistant is needed to do the job. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). Warning! When performing the following...

Tailgate upholstery — removal and installation
Advice. The door trim retainers can be removed with two slotted screwdrivers, but this job can be done much easier with a special tool Removing 1. Using a Phillips screwdriver,...

Motor-reducer drive for remote opening of the lock — removal and installation
Removing 1. Remove the upholstery of the tailgate (see above " Tailgate upholstery - removal and installation "). 2. Using a slotted screwdriver, disconnect the rod end from the...

Decorative overlay of a tailgate — removal and installation
Removing 1. Remove the door trim (see above " Tailgate upholstery - removal and installation "). 2. While holding the trim on the outside, use a socket wrench by 8 mm with a deep...

Switch (larva) tailgate lock — removal and installation
Removing 1. Remove the inner door trim (see " Tailgate upholstery - removal and installation "). 2. Remove the outer decorative door trim (see " Decorative overlay of a door of a...

Tailgate lock — removal and installation
Removing 1. Remove the door trim (see " Tailgate upholstery - removal and installation "). 2. Using a slotted screwdriver, unscrew the screw that fixes the lock drive rod. 3....

Tailgate — removal and installation
Comment. Power is supplied to the electrical equipment of the door through two wiring harnesses laid along the rear pillars. To remove the door from the car, you must remove both...