Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Disconnect the wire blocks from the washer pump outlets.
Recommendation. You can check the serviceability of the reservoir pump by connecting its terminals with wires to the terminals of the battery. To replace the pump, the washer reservoir must be removed.
3. Disconnect and remove the tank fastening belt.
4. We remove the tank from the niche.
5. Tilt the tank with the pump up, disconnect the tube from the pump nozzle.
6. After removing the plug, drain the remaining washer fluid from the tank into the canister.
7. If necessary, prying with a screwdriver, remove the electric pump from the tank.
8. Check the condition of the rubber seal installed in the opening of the tank. If replacement is necessary, remove the seal and install a new one.
Installation
We assemble and install the tank in reverse order. Fill the reservoir with washer fluid.