Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the battery (see "Battery - removal and installation").
Advice. If there is a lot of anti-freeze liquid left in the reservoir, then in order to save money, you can remove the windshield washer reservoir (see below) and, without removing the electric pump from it, pour the liquid into the canister.
3. Disconnect the hose and two blocks of wires from the tank, having previously marked the block connected to the outlet "+".
4. Prying with a screwdriver, remove the electric pump from the hole in the tank.
5. Check the condition of the rubber seal installed in the tank opening. If replacement is necessary, remove the seal and install a new one.
Installation
Install the windshield washer pump in reverse order.