Removing
1. We prepare the car for work and disconnect the terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
2. Lower the steering wheel.
3. Remove the lining of the instrument panel (see "Switches on the lining of the instrument panel - removal and installation").
4. With pliers, carefully, so as not to damage the plastic hinges of the instrument panel, we bend the edges of the two plates of the upper fastening of the shield.
5. On both sides of the shield, use a Phillips screwdriver to unscrew the two screws securing the instrument panel to the instrument panel brackets.
6. We take out the shield from the opening of the instrument panel and disconnect the two pads of the wiring harnesses.
Comment. The instrument panel connectors are of a different color, so there is no need to mark the pads.
7. Remove the instrument panel.
Installation
Install the instrument panel in reverse order. We connect the wiring harness blocks to the shield in accordance with their color.