Warning! Do not touch the bulb of the halogen lamp with your fingers. Work in clean cotton gloves without rubber coating. Fat fingerprints remaining on the lamp bulb will shorten its service life several times. After accidentally touching the lamp bulb with your fingers, wipe the bulb with a clean cloth dampened with alcohol.
Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the battery (see "Battery - removal and installation").
3. Turn the cover of the high beam section of the headlight counterclockwise and remove it from the headlight.
4. Remove the wire tip from the output of the high beam lamp.
5. We release the spring clip of the lamp.
6. Pulling the spring clip up, remove the high beam lamp from the section reflector, holding it by the output.
Installation
Install the new headlight bulb in reverse order. Before connecting the wire end, make sure that the lamp is securely fixed in the reflector hole
The dipped beam bulb should be replaced in the same sequence as the high beam bulb (see above for details)..