Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Using a Phillips screwdriver, unscrew the three screws securing the linings to each other and three screws securing the bottom lining to the steering column.
3. Move the steering column locking lever down to the stop and lower the steering column.
4. Remove the bottom trim and disconnect the alarm switch wiring harness from it.
5. Remove the rubber ring.
6. Disconnect the wiring harness block from the alarm switch.
7. Remove the top trim of the steering column.
8. If necessary, remove the alarm switch from the lining.
Installation
Install pads in reverse order.