Wheels, tires and hubs of car VAZ-2114

Specifications of wheels and tires
Table 10.1.1. Basic data for control, adjustment and maintenance Disk size 5Jx13H2 ET 35 Mounting hole diameter, mm 98 Disc central hole diameter, mm 53 Tire size 175/70R13 82T...

Description of the construction of wheels and tires
The manufacturer installs steel wheels on the car (discs) for tubeless tires 5Jx13H2 ET 35, where: 5 rim width in inches; J symbol for the rim profile; 13 is the diameter of the...

Wheels, tires and hubs — checking the technical condition
To do the job, you will need a caliper with a depth gauge. 1. Before each trip, we carefully inspect the wheels of the car and their fastening elements. Each wheel is attached to...

Tires — pressure check
Tip: Check the air pressure in your tires every 500 km (500 km). The air pressure in a car tire is not constant. When the ambient temperature rises, the pressure in the tire...

Wheel — replacement
To perform the operation you will need: "balloon" wrench or wrench by 17 mm ( by 19 mm for early production cars); jack; anti-recoil stops; jack support (if the machine is...

Front wheel bearing — replacement
The bearing of a nave of a forward wheel unadjustable. If there is play in the bearing, it must be replaced. An assistant is needed to complete the work, and you will also need:...

Rear wheel bearing — replacement
To complete the work you will need: two or three-jaw puller; a stripper of internal lock rings; cup puller. Removing 1. We prepare the car for work (see " Preparing the car for...