Note: Operation is shown on the left headlight. Removal of the right block headlight is carried out similarly. For the convenience of working with the spruce headlight, you can remove the battery, and to work with the right headlight, you can remove the windshield washer reservoir.
Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the inner lining of the radiator (see "Facing of a radiator - removal and installation").
3. Through the opening formed, use a Phillips screwdriver to unscrew the self-tapping screw for fastening the inner part of the headlight trim and radiator trim.
4. Remove the front left turn signal (see "Front direction indicator - removal and installation").
5. Through the resulting opening, unscrew the self-tapping screw for fastening the outer part of the headlight trim.
6. Pressing the lock of the working cylinder of the headlight hydraulic corrector, turn the cylinder counterclockwise, remove it from the headlight housing.
7. Disconnect the wiring harness block from the headlight.
8. Using a 10 mm socket wrench, unscrew the three nuts securing the headlamp.
9. Using a Phillips screwdriver, unscrew the headlight mounting screw and remove the headlight.
10. Having released the two latches, remove the lining from the headlight.
Installation
Install headlight in reverse order.