Car cooling system VAZ-2114

Specifications of the cooling system
Table 8.2.1. Basic data for control, adjustment and maintenance Temperature of the beginning of opening of the main valve of the thermostat,°С 85-89 Full opening temperature of...

Description of the design of the cooling system
Engine cooling system - liquid, closed type with forced circulation of coolant and expansion tank. The engine cooling system uses special liquids based on a mixture of water and...

Cooling system — checking the technical condition
When operating a car, the condition of the cooling system can be assessed by the coolant temperature gauge and the liquid level in the expansion tank. A low coolant level is...

Coolant — replacement
We replace the coolant after 75,000 km, or after five years, whichever comes first. To perform the work, you will need a wide container with a volume of at least 8 liters. It is...

Expansion tank — removal and installation
Removing 1. Partially drain the coolant (see " Coolant - replacement "), or with a pear we select the coolant from the tank. 2. Disconnect the wiring harness from the coolant...

Thermostat — removal and installation
Removing 1. Drain the coolant (see " Coolant - replacement "). 2. Remove the air filter (see " Air filter - removal and installation "). 3. Using a Phillips screwdriver, loosen...

Coolant pump — replacement
Removing 1. Drain the coolant (see " Coolant - replacement "). 2. Remove the timing belt (see " Timing belt - replacement "). 3. socket wrench by 10 mm unscrew four bolts (1 and...

Electric fan — removal, disassembly and installation
Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the air filter (see " Air filter - removal and installation "). 3. Cut...

Radiator of the engine cooling system — removal and installation
Removing 1. Drain the coolant (see " Coolant - replacement "). 2. Remove the electric fan (see " Electric fan - removal, disassembly and installation "). Note: If necessary, the...