Table 8.2.1. Basic data for control, adjustment and maintenance
|
Temperature of the beginning of opening of the main valve of the thermostat,°С |
85-89 |
|
Full opening temperature of the main thermostat valve,°С |
102 |
|
Pressure of opening of the final valve of a stopper of an expansion tank, kPa |
110-150 |
|
Pressure of opening of the inlet valve of a stopper of a broad tank, kPa |
3-13 |
|
The temperature of the coolant in a warm engine at an ambient temperature of 20-30°С and a fully loaded vehicle driving at a constant speed of 80 km/h, not more than,°С |
95 |
|
Liquid volume in the engine cooling system, l |
7,8 |
|
Coolant |
OZHK-KHT; OZH-40-HT; OZh-65-HT; OZHK Antifreeze; OZH-40Tosol; OZH-65Tosol; OZh-40; OZH-65; OZHK-KSK; OZh-40SK; OZh-65SK; Lada-A40; OZH-Ktosol-TS; OZH-40Tosol-TS; OZH-65Tosol-TS; Antifreeze G-48; AGIP Antifreeze Extra; Glysantin G03; Glysantin G913 |
Table 8.2.2. Tightening torques for threaded connections
|
Name of units and parts |
Thread |
Tightening torque, Nm (kgf·m) |
|
Coolant Temperature Gauge Sensor |
Μ14x1,5 |
24-27 (2,5-2,8) |
|
Bolts of fastening of the pump of a cooling liquid |
M6 |
7,6-8,0 (0,8-0,8) |
|
Nuts of fastening of a branch pipe of the thermostat |
M8 |
16,0-22,6 (1,6-2,3) |
|
Bolts of fastening of a flange of a pipe of the cooling system to the block of cylinders |
M6 |
4,2-5,2 (0,4-0,5) |
|
Bolts of fastening of auxiliary elements of the engine |
M6 |
6,7-8,2 (0,7-0,8) |