Exhaust system VAZ-2114

Tightening torques for threaded connections
Table 8.5.1. Tightening torques for threaded connections Name of units and parts Thread Tightening torque, Nm (kgf·m) Nuts of fastening of the inlet pipeline and a final collector...

Description of the design of the exhaust system
The exhaust system consists of an exhaust manifold, a front pipe, a main and an additional muffler and is equipped with a catalytic converter. Exhaust system: 1 - exhaust pipe...

System of release of the fulfilled gases — check of a technical condition
During the operation of the car, the elements of the exhaust system are exposed to high temperatures, exhaust gases, water, snow and reagents that are poured over the road in...

Muffler suspension pads — replacement
Note: The suspension pads of the main and additional mufflers can be replaced in any order. To complete the work, you will need a viewing hole or overpass. Execution sequence 1....

Metal-graphite o-ring — replacement
To complete the work, you will need a viewing hole or overpass. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Key by 13 mm we...

Silencer — replacement
To complete the work, you will need a viewing hole or overpass. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Ring wrench by...

Additional muffler — replacement
To complete the work, you will need a viewing hole or overpass. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Disconnect the...

Catalytic Converter — Replacement
To complete the work, you will need a viewing hole or overpass. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. socket wrench by...

Downpipe — removal, gasket replacement and installation
To complete the work, you will need a viewing hole or overpass. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Disconnect the...