Table 8.4.1. Basic data for control, adjustment and maintenance
|
high voltage wiring harness |
2111-3707080-12 |
|
Spark plug marking (manufacturer) |
A17DVRM (ZAZS) |
|
Spark plug thread |
M14x1,25 |
|
Gap between electrodes, mm |
1,0-1,1 |
|
Engine Ignition Module 2111 (1,5i) |
2112-3705010-01, 2112-3705010-02 |
|
Engine ignition coil 11183 (1,6i) |
2111-3705010-02 (54.37005) |
|
Engine injectors 2111 (1,5i) |
2111-1132010-02 |
|
Engine injectors 11183 (1,6i) |
BOSCH VAZ20734 |
|
idle speed controller |
2112-1148300-01 |
|
Canister purge valve |
2112-1164200-02 |
|
crankshaft position sensor |
2112-3847010 (191.3847) |
|
Camshaft position sensor |
2112-3706040 |
|
coolant temperature sensor (COURT) |
2112-3851010 |
|
Throttle position sensor |
2112-1148200 |
|
Knock sensor |
2112-3855020 |
|
Mass air flow sensor |
21083-1130010-01, 21083-1130010-10 |
|
Oxygen concentration sensor |
2112-3850010-20 |
|
Vehicle speed sensor |
2110-3843010-13, 2110-3843010-18 |
Table 8.4.2. Tightening torques for threaded connections
|
Name of units and parts |
Tightening torque, Nm (kgf·m) |
|
Bolt of fastening of the gauge of position of a cranked shaft |
8,0-12,0 (0,8-1,2) |
|
Bolt of fastening of the gauge of position of a camshaft |
8,0-12,0 (0,8-1,2) |
|
Bolts of fastening of the gauge of the mass expense of air |
3,0-5,0 (0,3-0,5) |
|
Nut of fastening of the gauge of a detonation |
10,4-24,2 (1,0-2,4) |
|
coolant temperature sensor |
9,3-15 (0,9-1,5) |
|
Oxygen concentration sensor |
25,0-45,0 (2,5-4,5) |
|
Spark plug |
30,7-39,0 (3,1-4,0) |
|
Module fixing screws (coils) ignition |
3,3-7,8 (0,3-0,8) |