1. Turn out three screws of fastening of a pocket of an upholstery to the panel of the left door.
Note. The lower part of the door upholstery is simultaneously attached to the inner body panel with the pocket fastening screws.
2. Remove the plastic pocket latches from the holes in the upholstery.
3. Press the latches, remove the right front sliding glass position switch from the pocket along with the wiring harness block..
4.... and disconnect the block from the switch.
5. Similarly, remove the switch of the left front sliding window from the pocket and remove the pocket of the front door upholstery.
6. Remove a decorative overlay of the armrest handle.
7. Turn out two screws of fastening of the handle to the internal panel of a door …
8.... and remove the handle.
9. Squeeze the latches securing the lining of the inner handle of the lock to the door panel..
10.... and remove the lining.
11. Turn away the button of blocking of the lock of a door.
12. Turn out screws of fastening of the loudspeaker of acoustic system to the panel of a door of a body.
13. Remove the speaker from the hole in the door panel and disconnect the two wires from the speaker contacts.
14. Remove the handle and facing of the mechanism of management of a rear-view mirror.
15. Using a screwdriver, carefully remove six caps from the holes in the door panel and remove the upholstery of the front left door.
16. Establish an upholstery and details of an upholstery in an order, the return to removal. If necessary, replace damaged clips securing the upholstery to the inner door panel.
17. The upholstery of the front right door is removed and installed in the same way.