Replacing the rear seat belt (sedan)

You will need: screwdriver, socket head «at 17», collar.

1. Tilt the rear seat cushion forward, remove the trim from the head of the lap belt fastening bolt..



2.... and remove the bolt.

Note. Belt bolts of different lengths. The inertial coil is fixed with the shortest bolt, the longest (lower) - lap belt.

3. Remove a decorative overlay of a bolt of fastening of the top bracket of a belt.



4. Turn out a bolt, holding a belt.



5. From the trunk side, push up the belt cover from the rear shelf.



6. Turn out a bolt of fastening of an inertial coil of a belt.



7. Pull the belt with lining into the trunk through the hole in the rear shelf and remove the belt from the car.



8. Turn out a bolt of fastening and remove the lock of a belt.



9. Install a new belt in the reverse order of removal.