Front seat adjustment

To ensure the most comfortable fit for people of different heights and builds, the position of the driver's and front passenger's seats can be changed both in the longitudinal direction and in the angle of the backrest. In addition, the height of the headrest can be adjusted.



The inclination of the backrest is adjusted by turning the handle at the base of the backrest.

To adjust the position of the front seats in the longitudinal direction, pull up the locking lever located at the bottom of the front seats and move the seat on the slide to a comfortable position. After installing the seat, lower the lever and move the seat back and forth until it is securely locked.

Note. The position of the rear seat is not adjustable, however, on VAZ-2114 and BA3-2113 cars, it is possible to unfold it to increase the usable trunk area.

Warning! Adjust the driver's seat only when the vehicle is stationary. If you try to adjust while driving and the seat does not lock properly in the fore and aft direction and the seat suddenly moves, you may lose control of the vehicle.

To change the position of the head restraint, move it up or down, overcoming the force of the latches. The optimal position of the head restraint is that its upper edge is flush with the top of the head.

Note. For very tall people, raise the head restraint to its highest position; for very short people, lower it to its lowest position.