Car transfer case VAZ-2121

Transfer box device
The transfer box device is shown in fig. 3-38 and 3-39. Pic. 3-38. Transfer case: 1 - driven gear; 2 differential bearings; 3 - spring washer; 4 - retaining ring; 5 - differential...

Possible malfunctions of the dispenser, their causes and methods of elimination
Vibration of the transfer case and body floor (in the front seat area) when starting the car from a standstill and accelerating in I, II and III gears Vibration of the transfer...

Methodology for determining the causes of vibration of the transfer case and the floor of the body
First of all, note at what speed the vibration of the transfer case occurs, then proceed to determine the causes of vibration. Challenge #1 Set the transfer case and transmission...

Removal, installation and centering of the transfer case
Removing Place the vehicle over a pit or on a lift. Release the parking brake lever and place the transfer case and transmission shift levers in the neutral position. Remove...

Disassembly and assembly of the transfer case
Disassembly Flush the transfer case and drain the oil. Mount the transfer case on a stand for dismantling and loosen the nuts securing the flanges on the drive shaft and on the...

Checking the technical condition of the transfer case
Before inspection, thoroughly clean all parts of the transfer box with a brush and scraper, and then rinse. Blow out the parts with compressed air. Rinse and blow out the bearings...

Transfer case test
Test the assembled transfer case at the stand for noise, build quality and no oil leakage. Carry out the check sequentially in the highest and lowest gears at the following...