Repair of driveline VAZ-21213

Cardan shaft device
The device of shafts of cardan transfer is shown in fig. 3-47, 3-48, 3-49. Pic. 3-47. Cardan gear assembly: 1 - front propeller shaft; 2 - intermediate cardan shaft; 3 - transfer...

Possible gimbal malfunctions, their causes and methods of elimination
Knocking in the driveline when starting off, during sudden acceleration or gear shifting Cause of malfunction Elimination Method 1. Loosening the bolts and nuts securing the...

Removal and installation of cardan
Position the vehicle on a lift or pit, ensuring that the front and rear wheels turn freely on one or both sides of the vehicle. Park the vehicle securely, release the parking...

Checking the technical condition of the cardan without disassembly
After cleaning and washing the cardan shafts, check the cardan joints of the shafts for ease and smoothness of turning the forks and for the absence of significant axial and...

Dismantling the driveline
Rear and front shafts Apply marks (paint or punch), which determine the relative position of the mating parts in order to connect them during assembly in the same position to...

Checking the technical condition of the cardan
Eccentricity test Install front (rear) cardan shaft in the centers and, turning it, check the runout of the pipe, which should not exceed: 0.5 mm at a distance of 50 mm from the...

Cardan assembly
Assemble cardan shafts in the reverse order disassembly subject to the following: apply evenly 3-4 g of Fiol-1 or Fiol-2U lubricant on splined joints; when connecting the parts,...

Balancing of cardan shafts
The front and rear driveshafts are balanced on special machines and balanced by welding metal plates. At a speed of 5500 min -1 shaft unbalance controlled on surfaces A and B...

Cardan transmission of cars VAZ-2129 and VAZ-2131
An increase in the base of the car by 500 mm led to structural changes in the driveline. The changes affected the rear driveshaft and are as follows: an additional rear driveshaft...