Gearbox repair VAZ-21213

Gear box device
The gearbox device is shown in fig. 3-12, 3-26 , 3-34 . Pic. 3-12. Transmission: 1 - input shaft; 2 - front cover with guide sleeve; 3 - input shaft seal; 4 - spring washer; 5 -...

Possible malfunctions of the gearbox, their causes and methods of elimination
Noise in gearbox Cause of malfunction Elimination Method 1. Bearing noise. 1. Replace defective bearings. 2. Wear of gear teeth and synchronizers. 2. Replace worn parts. 3....

Removal and installation of a transmission
Removing Place the vehicle over an inspection ditch or on a lift, put stops under the front wheels and hang the rear axle on one or both sides. Release the parking brake and place...

Disassembly and assembly of the gearbox
Disassembly Rinse the gearbox and install it on the stand. Drain the oil and remove the bottom cover with gasket. Remove the clutch release fork, and from the guide sleeve of the...

Checking the technical condition of the gearbox
Cleaning Thoroughly clean the gearbox parts before inspecting. Use a brush or scraper to remove all deposits and clean the holes and slots of possible contamination, then flush to...