Doors, windows, hood and trunk of cars VAZ-21214

Removing the door upholstery
We remove the door upholstery to access the lock and power window mechanisms. Pry off the latch of the window handle with a screwdriver (insert a screwdriver between the latch and...

Removing the door lock
Removing the door trim (see Removing the door upholstery ). Using a Phillips screwdriver, unscrew the two screws securing the inner door handle. Bringing the handle to the window...

Removing the outer door handle
Removing the door trim (see Removing the door upholstery ). Disconnect the lock release rod from the lock release roller (see Removing the door lock ). head «for 8» unscrew the...

Door glass replacement
Removing the door trim (see Removing the door upholstery ). We pry with a slotted screwdriver.. ... and remove the inner glass seal. Remove the outer glass seal in the same way....

Removing the power window mechanism
We remove the window regulator mechanism to replace it or when the door is completely disassembled. Removing the door trim (see Removing the door upholstery ). Disconnect the...

Removing the door opening limiter
Removing the door trim (see Removing the door upholstery ). Through a punch, we knock out the pin of the door opening limiter. The pin for fixing is knurled. head «on 10» unscrew...

Removing the door
Disconnect the door opening limiter from the body pillar (see Removing the door opening limiter ). We loosen with an impact screwdriver with a Phillips tip No. 3: three screws...

Removing the fuel filler cap
Opening the hatch cover.. ... use a Phillips screwdriver to unscrew the two screws.. ... and remove the fuel tank cap.

Removing the tailgate trim
Prying off the ornament from above with a slotted screwdriver (above the letters «H» and «A» in a word «NIVA»), we derive the two upper latches from the overlay. Having shifted...

Removal of an upholstery of a door of a back
Using a Phillips screwdriver, unscrew the eight screws securing the upholstery to the door.. ... and remove the upholstery. Install upholstery in reverse order.

Removing the tailgate lock actuator
Removing the left upholstery (see Removing upholstery ). Using a Phillips screwdriver, unscrew the six screws securing the tailgate sill lining.. ... and remove the lining. Using...

Removing the tailgate lock
Remove the tailgate sill lining and disconnect the lock drive cable (see Removing the tailgate lock actuator ). head «on 10» unscrew the two bolts securing the lock housing.. ......

Removing the gas-filled stops of the tailgate
We support the tailgate with a wooden block of suitable length. key «at 13» open the top.. ... and the lower fastenings of the door stop. Remove the tailgate stopper.

Removing the tailgate
Disconnect the tailgate glass cleaner motor connector (see Removing the tailgate glass cleaner ). We mark the position of the terminals in the block. Pry off with a thin slotted...