Disconnect the lower shock absorber mount from the spring cup (see Removing the shock absorber) and stabilizer bar mount (see Removing the stabilizer bar).
We unscrew the nut of the axis of the lower arm a few turns (see Removing the lower arm).
Substituting the emphasis under the lower arm, disconnect the ball joint from it (see Removing the lower ball joint).
We reduce the height of the adjustable stop or, with a hard stop, raise the car.
We lower the lever and remove the lower coil of the spring from the protrusion of the cup.
Remove the spring with the upper support cup and insulating gasket.
Remove the support cup and insulating gasket from the upper coil of the spring.
Remove the plastic insulating gasket from the protrusion of the lower support cup.
To remove the lower spring seat..
... head «at 17» unscrew the nut of the cup mounting bolt, holding the bolt from turning with a wrench of the same dimension.
We take out the bolt.
We turn off and take out three more bolts of fastening of a cup.
Remove the lower spring cup.
Install the removed parts in reverse order.
The nuts of the axis of the lower arm and the bolt of the lower shock absorber fastening are finally tightened in the position «car on wheels».